Showing posts with label green exhibits. Show all posts
Showing posts with label green exhibits. Show all posts

Saturday, October 29, 2011

The Green Exhibit Checklist


I'm an advisor on a wonderful project designed to create tools for the museum/design industry that help to foster more sustainable project development and exhibit production.  Or in simpler terms, helping exhibit folks to be more thoughtful about the broader ecological impacts of our work .

The project is headed up by the fine folks from OMSI (Oregon Museum of Science and Industry) with funding from the National Science Foundation.

One of the "in-process" products that I'm most excited about is "The Green Exhibit Checklist"

The Green Exhibit Checklist is a tool to evaluate the environmental sustainability of exhibits. The goal of the Checklist is to inspire exhibit/design teams to plan exhibits with environmental considerations in mind. It awards points (along the lines of the LEED process) for five key strategies for reducing the environmental impact of exhibit production:

• Reducing new material consumption
• Using local resources
• Reducing waste
• Reducing energy consumption
• Reducing products with toxic emissions

Rather than focusing on a dogmatic list of “dos and donts” or a list of “must use” green materials, the Green Exhibit Checklist considers sustainable design as an institution-wide, evolving process.

If you'd like to find out more about OMSI's Promoting Sustainable Decision Making project, you can click on over to the website called "Exhibit SEED" or better yet, click here to download a PDF of the most recent version of The Green Exhibit Checklist, so you can start using it yourself!

As a side note, I'll be speaking at the upcoming NEMA (New England Museum Association) Conference in Hartford during the Exhibits Luncheon on Thursday, November 17th on just this topic.


Don't miss out on any ExhibiTricks posts! It's easy to get updates via email or your favorite news reader. Just click the "Sign up for Automatic ExhibiTricks Blog Updates" link on the upper right side of the blog.

P.S. If you receive ExhibiTricks via email (or Facebook or LinkedIn) you will need to click HERE to go to the main ExhibiTricks page to make comments or view multimedia features (like videos!)

Thursday, May 20, 2010

6 Keys To Greener Exhibit Design


OMSI (The Oregon Museum of Science and Industry) in Portland, Oregon has long been concerned about "green design" and the choices and approaches that museums can take to create truly sustainable exhibit environments.

I'm an advisor on OMSI's NSF-funded project on Sustainability,  part of which will involve creating a set of models and guidelines for the museum field in order to promote more reflective practice about "green" exhibit design.  (You can download a PDF article about OMSI's progress, as well as the "working model" of the OMSI Green Exhibit Certification assessment tool via the NAME website.)

During my recent trip to Portland to discuss the OMSI Sustainability project, I got the chance to tour OMSI's exhibit workshop, which, besides being big fun, gave me 6 takeaways regarding green exhibit design to share with ExhibiTricks readers through a mini photographic tour. Enjoy!


1) Internal Capacity IS Local Design


You don't necessarily need a huge shop like OMSI's at your museum, but if you don't have some minimal "internal capacity" to fix, prototype, and build at least some of your own exhibit elements and program props, how can you foster local design (which is often the greenest design) at your museum?


2) Sharing Models of Green Design Helps Everyone


Ben Fleskes, the Production Director at OMSI, shared the model of the simple math exhibit shown above.  From the locally-produced metal framing materials, levelers produced in house, powder coating for durability, an exhibit idea adapted from the ASTC Exhibit Cheapbooks, a recycled (from the OMSI Shop Racks) plyboo top, and the whole thing assembled by a community volunteer, the component above has lots of nice green design approaches embedded in it.

I will certainly be encouraging the OMSI folks to include models and examples of green exhibit design from the museum field into the final sustainable exhibit design project materials.



3) Materials DO Matter 


Some designers crab about sustainable design discussions (or any design discussions) degenerating into a drool-fest over the latest, coolest materials.  While this is often the case, it is still important to be aware of the materials available, their use, and most importantly, their re-use.

It was clear from the shop tour, that not only are the OMSI staff extremely careful about materials (PVC is just a non-starter) they are just as thoughtful about how to reutilize or repurpose materials from old exhibits into new exhibits.



4) Involving the Community is an Integral Part of Sustainable Design



Here Ben shows off work on a ball machine prototype being developed by community volunteers using lots of creatively "scavenged" materials from the OMSI Exhibits Shop.  It was clear throughout my visit to Portland how much OMSI included the community in their exhibit building efforts.




5) Green Design Includes Extensive Prototyping


Here Todd Kehoe shows us some cool nanotechnology prototypes involving reused materials that were mechanically fastened (not glued) together, so they can be easily modified.  Similarly, graphics were produced using low-impact materials that can be easily changed and modified.  Prototyping ultimately saves time and money by allowing for more thoughtful materials and design solutions in the final exhibit components.



6) Green Design Can be Fun!


There often seems to be a perception that sustainable exhibits need to be plain, rough-hewn affairs made of sticks and mud without a trace of color, fun, or design flair.  To disprove that notion, Ben showed us the beginnings of his desk prototype (created from reused extrusions and other OMSI shop scrap by volunteers, of course!) to harness the nervous fidgeting of a worker's feet through a treadle system and transform the motion into energy to power simple office devices like lights or smart phones.

Thanks to the entire OMSI crew for helping move the conversation about sustainability and green exhibit design forward for the entire museum field!


Have some of your own green exhibit design tips or resources to share?  Let us know about them in the "Comments" section below.


Don't miss out on any ExhibiTricks posts! It's easy to get updates via email or your favorite news reader. Just click the "Free Updates" link on the right side of the blog. P.S. If you receive ExhibiTricks via email (or Facebook or LinkedIn) you will need to click HERE to go to the main ExhibiTricks page to make comments or view multimedia features (like videos!)

Saturday, March 13, 2010

Exhibits Exchange Now LIVE!



Think green!  Help find a "second home" for the many well-used (but still usable) "retired" exhibits, instead of letting them gather dust in storage or being tossed out!

Following up on the positive response I received on a recent blog posting about giving "retired" exhibits a new home,  I've just started a new Google Group called the "Exhibits Exchange"
 
The "Exhibits Exchange" group is a place to post information regarding used exhibits and/or components for sale, trade, barter, or exchange. 
     
It is free to join and free to post exhibit offerings on the "Exhibit Exchange" so please let friends and colleagues know about the group --- the more group members, and the more postings of  "used but usable" exhibits, the better the entire experience will be for everyone. 

Feel free to contact me directly if you have questions, comments, or concerns. 

Don't miss out on any ExhibiTricks posts! It's easy to get updates via email or your favorite news reader. Just click the "Free Updates" link on the right side of the blog.

P.S. If you receive ExhibiTricks via email (or Facebook or LinkedIn) you will need to click HERE to go to the main ExhibiTricks page to make comments or view multimedia features (like videos!)

Sunday, December 7, 2008

Free Exhibit Idea: 61 Trees Per Person

NPR recently did a story on the research of Professor Nalini Nadkarni of The Evergreen State College in Washington.

Basically, using satellite data from NASA, Professor Nadkarni was able to calculate that in 2005, there were 400,246,300,201 (more or less) trees on our globe! (You can read about the technical details on the NPR website.)

So how many trees per person are there? Nadkarni looked up the world's human population as of Dec. 31 and found that on that day, we numbered 6,456,789,877 (again, very more or less). Punching the figures into her calculator, she figured that the world supports 61 trees per person.

I think this story and the details about how the NASA data was crunched would make a great exhibit. If someone provides the venue, I'd be happy to work on it with them!

Don't miss out on any ExhibiTricks posts! It's easy to subscribe right now via email (or your favorite news reader) with the tools on the right side of the blog.

Tuesday, April 1, 2008

Green Toys from Toys "R" Us: Good Green Fun?



As if you need further evidence that eco-friendly marketing and green products are on the rise, Toys"R"Us announced in a press release the launch of an exclusive line of environmentally friendly toys that will be marketed under the Toys"R"Us brand. Exerpts from the release are quoted below:

"The first toys in the collection -- Natural Wooden Toys, Natural Cotton plush animals and Organic Cotton Dolls -- will be available exclusively at Toys"R"Us stores nationwide and online at www.Toysrus.com by Earth Day, April 22.

The toy products promote "Good Green Fun." The toys come packaged in earth-tone colored boxes that bear a special "R" seal. This seal consists of a green version of the iconic Toys"R"Us reversed "R" logo with a green leaf, encircled by the words "Recycle, Renew, Reuse, Re-think," and signifies for parents that the toys are eco-friendly.

"We know that kids are becoming more environmentally conscious and are curious about how they can do their part to help protect the planet," said Karen Dodge, Chief Merchandising Officer, Toys"R"Us, U.S. "Going green is more than just a trend. It's becoming a lifestyle. This is just our first step in offering our customers the best selection of eco-friendly and organic products in all of our Toys"R"Us stores nationwide."

Crafted from natural materials, these items come in packaging that is made from no less than 70% recycled material. The Natural Wooden Toys are decorated using a unique wood-burning technique, which offers a classic look. The Natural Cotton plush animals and Organic Cotton Dolls are colored using natural or water-based dyes and are made with unprocessed, unbleached and untreated cotton.

In addition, the Forest Stewardship Council (FSC) certified that the materials used to make the Natural Wooden Toys were sourced from well-managed forests, using a system of ten rules that define responsible forest management. Each wooden product in the collection is marked with an identifiable FSC logo.

The Natural Wooden Toys include a fire engine, utility crane, shape sorter, trailer truck, racing car, formula car, alphabet blocks wagon and stacking train."


What does all this mean for museums and exhibit developers? Well, if you have an early childhood gallery, you better stash the primary-colored plastic toys from Playskool!

On a more serious note, as mainstream companies like Toys "R" Us and Wal-Mart develop, market, and sell green products, both Museum Exhibit Clients and Museum Customers will expect to see exhibition galleries and design features that show green sensibilities.

Is some of this "greenwashing"? Perhaps, but if Toys "R" Us can Reduce, Reuse, Recycle, and Rethink, can't Museums and Museum Designers as well?

Saturday, March 22, 2008

Green Exhibit Design: An Interview with Tim McNeil

A short while ago, I asked colleagues if they could recommend a good source for information about "green" (that is, eco-friendly) printers and printing materials suitable for museum exhibitions. While many museums are taking the first steps toward green exhibit design, it was clear that additional information in this regard would be helpful.

Happily, several folks referred me to Tim McNeil, who is an Assistant Professor in the Department of Design, and Director of the Design Museum at the University of California, Davis.

The Design Museum functions as a laboratory for exhibition design, interpretation, and practice. The 2007–08 season of eco-exhibitions at the Design Museum will present a range of work by designers at the forefront of sustainable and green design. McNeil is currently researching green design methods and technological advances that are applicable to exhibition environments. 

Tim was kind enough to answer a few questions for the ExhibiTricks blog as well as providing some resources that should prove useful to anyone interested in exploring the possibilities inherent in green design.



ExhibiTricks: Tell us a little bit about your background and how you came to the UC Davis Design Museum?

Tim McNeil: I’ve been working in the museum profession principally as an exhibition designer for nearly 20 years. A good part of that time was as a senior designer at the J. Paul Getty Museum in Los Angeles where I designed exhibits and gallery spaces for the Getty Center and Getty Villa. The experience at the Getty afforded me the opportunity to participate in the planning and design of two new museums and work with some of the best museum professionals, objects, resources, and interpretive environments in the world. I was also fortunate enough to be at the Getty at the right time. When I arrived in 1992 there was a desperate need for an exhibition design department to help facilitate in-house design solutions with Richard Meier and Partners, architects for the Getty Center. It was a once-in-a-lifetime opportunity to create a new design department from scratch for a museum with resources and major ambitions for the future.

What made the new exhibition design department at the Getty unique was the goal to hire designers who could traverse multiple design disciplines. We weren’t interested in the conventional museum model that pitched design teams working in three dimensions (exhibit designers) with those who work in two dimensions (graphic designers). The Getty’s exhibition design department employs 10 designers with backgrounds in architecture, industrial, interior, and graphic design. Each designer is expected to work on every aspect of an exhibition, from spatial design and display furniture to the exhibit interpretive elements and text, to the printed ephemera and promotional environmental graphics. This approach yields very cohesive design solutions when the conditions are right, relying heavily on cooperation and lack of design ego.

This “multi-disciplinary” studio model is now far more typical of design studio practice. Include engineers, computer scientists, and behavioral psychologists and you have the IDEO of the design community. I still consider the Getty’s exhibition design department groundbreaking within the museum community. Finding good designers who can traverse multiple areas was never easy and continues to be challenging. The design curriculum I teach at UC Davis was developed from this experience, I am preparing designers who can move fluidly between the design disciplines.

Towards the end of my tenure at the Getty, I was increasingly involved in exhibit design projects for other organizations and museums. These projects allowed me to tackle a range of different exhibition environments that were less object-based and more about ideas and interaction. I was looking for a new path, one that would provide me with the opportunity to explore the proverbial question “What is design?” together with finding answers to “What is exhibition design?”. There is very little academic research about the exhibition design process, it is a topic badly in need of further definition and exposure. Coupled with my commitment to teaching the exhibition designers of the future, the joint Design Museum Director and Professorial appointment at UC Davis was far too opportunistic to pass up.




ET: What has prompted your interest in "green " design and materials?


TM: I can cite three major factors:

1) A lifelong exposure to nature and the outdoors and a belief that we all have a social obligation to clean up after ourselves.

2) The beginning and end of a products life rests squarely with the designer. They are the conduit between idea and reality and therefore perfectly positioned to influence change.

3) My work for the environmental action center at the Natural Resources Defense Council in Santa Monica, CA. In 2003, the project held the distinction for being one of the first “green” interpretive centers in the nation's “greenest” LEED platinum certified building: http://www.nrdc.org/cities/building/smoffice/intro.asp#smtop




ET: Can you discuss the scope and goals of the "Year of Eco-Exhibitions" at the Design Museum?

TM: The season of exhibitions highlights the work of designers at the forefront of sustainable and green design. The exhibitions balance conceptual design ideas with practical applications and are intended to provoke questions. The sustainable design movement is full of contradictions, there aren’t necessarily any right or wrong answers, but there are some incredibly ingenious and innovative ideas out there. The exhibitions are accompanied by a series of lectures and a symposium. These have allowed the UC Davis Design Museum to invite some of the most engaged speakers on green design to participate with the regional and university community. The upcoming Fashion Conscious exhibition and symposium (May 18, 2008) is one of the first in the country to tackle the rapidly expanding and controversial world of sustainable fashion and textiles.

Each of the exhibitions closely aligns itself with the three main emphasis areas in the UC Davis Design Program; visual communication, interior architecture, fashion, and textiles. They also educate design students about the future of their chosen profession and complement the program’s courses on sustainable design. Design education is going through another revolution and sustainability is at the heart, it’s amazing how motivated most students are about the issues, and how quickly education is having to adapt.

A primary goal of the exhibition series is to introduce the green exhibition design initiatives I had been incubating over the past several years. This had been my objective since becoming director of the museum in Fall 2005. The strength of the UC Davis Design Museum lies in its ability to experiment with objects and content and how this material is communicated within an exhibition environment. This is the complete antithesis of my work at the Getty Museum where perfection was the ultimate goal. Not to mention that the budget resources are vastly different. I wanted to demonstrate to the museum community that an exhibition can be designed and built using entirely recycled, rapidly renewable, and non-toxic materials, and that the design quality of the space, furniture and graphics do not have to be compromised. The subject of energy efficiency was also broached since this is a significant issue for museums with complex lighting and HVAC systems.
Critical to the success of the exhibitions and our efforts to promote sustainable behavior were the inclusion of accessibly written interpretive elements about the green initiatives we had taken. A series of eco-signs describe and draw attention to the green features using bold graphics. These signs have been evaluated and simplified as the year progresses to help determine the best way to connect visitors to potentially complex and unfamiliar topics.

The long-term goal is the successful continuation of this process at the Design Museum and it’s influence on others. I’m using several forums to communicate the results and findings from the green design wiki to talks and presentations at conferences and at museums. My continued design work for other museums and exhibition spaces serves as a venue for exploring these initiatives in a larger and more visible way. I anticipate publishing the work as well in the future.



ET: What are some of your favorite online (or offline!) resources for people interested in finding out more about eco-friendly design or materials?

Online:

http://www.treehugger.com/
http://www.designersaccord.org/
http://www.guardian.co.uk/ (Good stories on the environment)
http://www.makower.com
http://www.nrdc.org/
http://www.buildinggreen.com/
www.greenexhibits.org


Offline:
My students and colleagues at UC Davis.



ET: What advice would you have for fellow museum professionals, especially those from smaller museums, in developing more eco-friendly exhibitions?

TM: Taylor Wise-Harthorn, a graduate student at San Francisco State University has done some initial surveys with museum exhibition design professionals to help determine what is preventing them from adopting green practices. Cost and lack of information scored high, but the most cited reason was policy. Convincing museum directors and senior staff to go green is challenging because it necessitates change and often an upfront cost. However, the upside is that once the initial steps to go green have been taken, it is often very difficult to backtrack.

I have a top ten list of ways to green an exhibition environment, that are simple and applicable to museums of all sizes and can be implemented with little effort:

1. Improve the energy efficiency of exhibition lighting by installing timers and sensors to manage usage. Install CFLs when appropriate.
2. Adjust exhibition climate control settings where possible. Do the objects or exhibits need to be that cool or warm?
3. Design modular exhibition components/furniture that can be easily recycled or reused.
4. Practice the 4Rs (Reduce, Reuse, Recycle, Reinvest). Do more with less.
5. Use low-VOC paints.
6. Avoid vinyl-based signage products.
7. Print on 100% post-consumer paper using non-petroleum-based inks.
8. Use Agri-fiber products such as wheat straw rather than wood-based particle boards.
9. Use screws instead of glues.
10. Inform staff, vendors, and most importantly visitors about your efforts.



ET: Can you tell us more about the Green Design Wiki?


TM: It is very much a collaborative effort between myself and former design student Alan Wells. Alan had chosen to focus specifically on green design for his undergraduate degree. He has now graduated but remains involved with the site's development and maintenance. I suspect you will hear about Alan and his work in this area in the future. Above and beyond the Design Museum website and exhibitions, the wiki is the most practical resource we can provide to the museum community. It is intended to provide a basic grounding in sustainable design concepts and initiate an ongoing dialogue about greening the exhibition design field. The array of materials and products is rapidly evolving, a wiki-based platform is the best model for having others contribute and for keeping it current.



ET: Have you come across any obvious examples of overselling or "greenwashing" in any particular areas of exhibition design or materials?


TM: Lighting manufacturers are guilty of over-hyping the quality of their energy-efficiency lamps and fixtures. CFL and LED alternatives to MR-16 halogen lighting lack the lumens, color rendering and temperature for track systems in exhibition environments. They do offer advantages (no UV, low heat) for localized case lighting where the intensity of light required is less, but I think the color temperature is not there yet, especially for lighting art objects.

Plastic lumber. Beware of the claims by certain manufacturers regarding their products' recycled content. Some contain little or no recycled plastic and even use PVC, the common belief is that all plastic lumber is made from post-consumer waste plastics and sawdust.

Signage products for banners is probably the most contentious. The profits to be made in this industry are huge, and printers and substrate manufacturers are all grappling for an angle on how green they are, or want to be. The Design Museum uses a biodegradable PVC alternative for traditional vinyl banners-- while certainly a step in the right direction, it still has to be manufactured using raw materials and lots of energy. Ultimately it still has to be thrown away in landfill, where under the right composting conditions it will decompose more quickly. The green exhibit design industry is in its infancy and we are going to see a lot of conflicting messages. Lee Knight from Exhibitor magazine says:

“Today, nobody knows what Green really means — no common standards exist. Each client and supplier provides its own definition to its own satisfaction. To date, the number of reported exhibit-related Greenwashing incidents is almost nonexistent, but this could quickly change as the pressure from management to find Green exhibit solutions continues to grow.”
See: http://www.exhibitoronline.com/exhibitormagazine/feb08/knighterrant0208.asp



ET: I'm particularly interested in green aspects of printing and graphics for exhibitions. Any pointers you could offer in that area?

TM: The offset lithography printing industry has been using recycled paper and vegetable-based inks for some time and there really is no reason not to specify these products. The quality is comparable to traditional printing and with the advent of online printing services such as Greenerprinter.com, it is cost-effective and really easy. The signage and large-format graphics industry has some way to go before it can boast its green credentials. The main challenge facing the large format environmental graphics industry is the small quantities and custom-based design solutions (demand isn't driving change...yet!). Chemical-based processes and finishes are currently the only option given the longevity of a signage product, particularly for outdoor interpretive signage which has to withstand the elements, and depending on the location, indoor signage which needs to hold up to touch.

At the UC Davis Design Museum, we have been using a low-solvent-based ink on recycled paper, with no lamination or glues (they are stapled or clipped onto Homasote (recycled board) for all interior exhibition graphics. We've also printed on easily to recycle fabrics and are currently experimenting with Ecospun (recycled plastic bottles) and some of the natural organic cottons. The past exhibition (GreenStop) was printed on BioFlex (a biodegradable PVC banner alternative) using eco-solvent inks.

There are no alternatives to direct application vinyl lettering that I have found (vinyl not being an environmentally friendly product). We used a stencil (using vinyl and a vinyl cutter) on a wall and then rolled non-VOC paint over it and removed the stencil. It works well for titles and large headings and although you are still using vinyl for the stencil at least the product is removed from the exhibition environment.

Smaller graphics can be printed on colored papers using a laser printer. As long as you avoid foam core and spray mount, and use recycled paper boards and non-toxic glues this is a good economical and green way to produce graphics. Reusable clear acrylic covers rather than Polycarbonate laminates provide the protective covering.

The silkscreen process uses solvent-based inks and other chemicals (although the screens are reused). Exterior graphic/signage panels that use embedded graphics under laminates are very energy intensive and chemical-dependent. The commercial exhibit industry is poised to green itself in a big way (bigger business) and that, I predict will act as the catalyst that the large format graphics/ signage industry needs. Museums will then reap the benefits. 


Thanks once again to Professor Tim McNeil for taking the time to share his views and expertise on green exhibition design! To learn more about Tim and his work at UC Davis you can follow this link.

Let us know your own approaches to green exhibition design, or share some of your own favorite resources in the Comments Section.

Tuesday, March 4, 2008

Green Exhibit Tech: The EnerJar

I've been doing some work with several clients recently to produce exhibitions with a "green" theme. In the course of some of my research one of the interesting green gizmos I've come across is the EnerJar.

Basically the EnerJar is a device that accurately measures the power draw of electrical appliances.

(There are instructions on the EnerJar website on how to build your own DIY power meter.)

EnerJars would make a great project for museums to have their visitors build to take home, as well. It's a little scary to see how much energy all the "stuff" in a typical home uses!

The EnerJar was the Grand Prize Winner in the 2008 Greener Gadgets Design Competition. Check out their website for a great collection of inspiring green technology ideas.

What are some of your favorite green resources? Let us know in the comments section!

Thursday, February 28, 2008

Design Inspiration: Afrigadget.com


I love people who design wonderful things with limited resources. I really think that when you have to struggle a little, you come up with better, more creative solutions (instead of just throwing money at problems in an effort to make them go away.)

One of my new favorite museum design inspirations in this regard is the AfriGadget blog. Most of the AfriGadget postings outline how an African entrepreneur or tinkerer used simple materials to address a problem facing their local community. So you'll find out about such items as bamboo bicycles and low-tech energy generation devices.

AfriGadget reminds me of an excellent exhibition that I saw in NYC at the Cooper-Hewitt Museum, Design For The Other 90%, that I reviewed for ExhibitFiles.

What other sites or resources do you use to make "more from less"?
Post your answers in the Comments section below!

Saturday, February 9, 2008

Windbelts: Great Energy Exhibit Idea!



Shawn Frayne, a 28-year-old inventor based in California, got the idea for his innovative "Windbelt" technology while thinking about the way wind and vibrations caused the infamous Tacoma Narrows Bridge collapse. (See YouTube video at the end of this post.)

While working in Haiti, Shawn saw the need first-hand for an inexpensive way to generate electricity. Unfortunately, wind turbines were not very efficient when scaled down, had inherent safety issues for anything that got caught in the spinning blades, and all the copper wire required to create most types of turbines was expensive.

Shawn then came up with the elegant Windbelt approach and formed a start-up company called Humdinger Wind Energy, LLC.

Here's a simple set of instructions to make your own Windbelt-related project from Instructables.com that would be a great part of an Energy or Green Materials exhibition!

Friday, February 8, 2008

6 Questions To Ask
Museum Exhibit Designers

6 Q u Bead Letter E S T I Pastry Cutter O plain card disc letter n Vintage LEGO Letter S

Here’s a short list of questions that can help you get a sense of whether an exhibit designer might be a good partner for your museum’s next project:

1) How do you prototype exhibits?

Every aspect of an exhibition, including labels, can be tested out with visitors before the “final” version is produced. This does not have to be a horribly expensive or time-consuming process. As a matter of fact, masking tape, markers, and cardboard can go a long way in creating simple prototypes.

Avoid anyone who says things along the lines of: “We test out everything in the shop...” or “ We don’t need to prototype, because our stuff never breaks.” You need to turn real visitors loose on exhibit prototypes to avoid the dreaded “I never thought they would do that with our exhibit!”

You can find a free downloadable article on the exhibit prototyping at the POW! Website.



2) What’s your favorite exhibit?


If your response to this question is either a blank stare or a glib sales pitch --- RUN! Ideally, the designer can report on why specific aspects of an exhibit component or entire exhibition interested them or moved them in some way.

For example, I loved a large-scale interactive based on one of the scenes from a children’s book by William Steig. There were magnet-backed creatures and plants that multiple visitors could move around a room-sized jungle scene. This was part of a larger exhibition of Steig’s drawings in a normally “hands off” museum, The Jewish Museum in Manhattan. It was clear through this area, and a few others in the Steig exhibition, that the designers wanted to provide some colorful, open-ended experiences for families.



3) Will you let us directly pay subcontractors?

Money changes everything, doesn’t it? The financial aspects of your exhibit process should be as transparent as possible. The best designers allow you to see “the books” so you can be assured that the maximum amount possible of your project resources are being spent on items that will show up in your exhibit galleries.

Beware of too many miscellaneous fees or excessive charges for things like FedEx and faxes. It is reasonable for any designer to cover their overhead charges, but it is just as reasonable for you to ask to contract directly with specialists serving as subcontractors to avoid excessive “markups”.



4) Can we use green materials?


No, I don’t mean Kiwi Corian! Your exhibit designer should have an increasing familiarity with environmentally friendly materials. Even if your potential design partner is not a “green expert”, they should be willing to work with you to create designs, and employ solutions, that are “green.”

A great resource is the greenexhibits.org website.



5) Have you ever worked in a museum?

While this is not a complete deal-breaker, a design solution from someone who has actually had to fix an exhibit after 600 fifth graders have pummeled on it carries a lot more weight with me than a beautiful computer rendering from a recent design school grad.

Don’t be afraid to ask practical questions like, “How will this work with large school groups?” or “Will this computer interactive automatically reboot if it freezes up?”



6) Who are some of your repeat customers?

At the end of every crazy exhibit project and installation, after everyone has had a few days to obtain the requisite amounts of food, sleep (and showers!) you ask yourself an important question: Would I ever work with (fill in the blank) again?

The people whom you continue to work with, and who continue to work with you speaks volumes about your work ethic and the ability to get the job done. The mark of a great museum exhibit designer is how they overcome unexpected challenges related to timing or finances or the other hundreds of things that could cause a project to become unhinged.



What are some of the questions you ask potential design partners? Feel free to comment below!

Or better yet, contact me so we can start working on YOUR next project!

Tuesday, July 17, 2007

Green Exhibits


One of the building trends in the museum business is GREEN.

Clients and visitors are, rightfully, concerned about the materials used to create both museum buildings and exhibitions. In many ways, children's museums have been leading the way in the green revolution.

Brenda Baker and her colleagues at the Madison Children's Museum have been concerned about the types of materials traditionally used in exhibits (lots of plastics and volatile chemicals) and have really worked hard to create more eco-friendly displays. One great product of their work is the website greenexhibits.org a wonderful compendium of information for everyone concerned about green materials.

The other program that children's museums lead the way in is LEED certification of their buildings.

What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System™ is the nationally accepted benchmark for the design, construction, and operation of high-performance green buildings. LEED gives building owners and operators the tools they need to have an immediate and measurable impact on their buildings’ performance. LEED promotes a whole-building approach to sustainability by recognizing performance in five key areas of human and environmental health: sustainable site development, water savings, energy efficiency, materials selection, and indoor environmental quality.

Several notable examples of new, or soon-to-be-completed, building projects from the children's museum world can be found in Pittsburgh, Brooklyn, and Helena, MT.

Unfortunately, green buildings and exhibit supplies are often more expensive than their "non green" substitutes, so it takes a real commitment on behalf of clients and designers to push green design. But, thanks to websites such as greenexhibits.org we all can have a better idea of what our eco-friendly design options are.

Tuesday, June 26, 2007

Making a "Little Sky" in Big Sky Country



I've just returned from beautiful Helena, Montana where I've been working with the fine folks from ExplorationWorks! (an emerging museum of science and culture) set to open later this Fall of 2007.

Aside from their wonderful community-built "green" building next to the cool Montana-themed Great Northern Carousel downtown, we've been working together over the past few visits to help ExplorationWorks find its unique voice, rather than just replicating things they've seen in other museums.

RANT BEGINS HERE

Which brings me to the topic of perennial favorite exhibit themes for start up museums like "grocery stores" or "mini hospitals." As I've said before, I'd be quite happy never to see another "grocery store" exhibit inside a museum! It's not that I have any problem with these "exhibit chestnuts" per se, but rather the idea that having a mini grocery store is a substitute for doing the real hard and creative work of finding your own "institutional voice." I realize it may be tempting to get the local grocery chain to donate money to outfit a space with kid-sized baskets and bins of plastic fake food, and their logo plastered all over everything (naturally!) but is that really the best possible use of your valuable exhibit space? Personally I'd say you've just created an "entropy exhibit" rather than a grocery store exhibit.

And, don't get me started, on all the amazing learning about nutrition, "cultural diversity" ("we have plastic ethnic food in our store") and the like, that's supposed to occur in these spaces. Little kids like to take things out of containers and pile them up or put them into other containers. PERIOD. I have a toybox in my living room that my kids use for this purpose, but I wouldn't call it an exhibit!

RANT ENDS HERE

But, getting back to our friends in Helena...I almost had an existential exhibit developer crisis when Suzanne Wilcox, the Director at ExWorks said she wanted to change some things around in our initial design for their Early Childhood Gallery (called "Little Sky Country") and include a mini Post Office and set of stores. HORRORS! Was I going to be forced to give up my strongly held beliefs in the name of making a living? Fortunately not, and I think the resolution we came to in Montana could be useful for other museums considering mini "anythings" in the exhibit galleries.

Mostly we realized that the specific "wrapper" for different exhibit components was not as important as promoting a flexible design architecture that could support the content and desired visitor behaviors such as role-playing, sorting, decision-making, etc. So rather than trying to create a miniature urban "mini Main Street" in the midst of a nature-themed early childhood space, we created a single flexible structure with a Foresty facade whose signage and "props" could be changed and experimented with. (A few initial ideas include "Ma Nature's Cafe" to explore what animals eat, and "The Nest Depot" to discover what sorts of materials animals use to build their homes.)

I'm really excited about what POW! (in collaboration with DCM Fabrication in Brooklyn) has in the "works" for the big ExplorationWorks grand opening of Little Sky Country in late Fall 2007!